Gaming monitors are all about “how high can you go?” The recent appearance of 360 Hz panels indicates that refresh rates are unlikely to top out any time soon. Ultra HD resolution packs tremendous pixel density into relatively small 27-inch screens. Extended color widens the visible gamut to a larger percentage of what the human eye can see. And features like adaptive sync and blur reduction attempt to deliver more value.
But many users are also asking, “how low can you go?” And that refers to price. Fancy features and exotic performance are great, but they come at a cost. One 25-inch 360 Hz monitor runs FHD resolution and costs $700. What can you buy for less than $200 that delivers a satisfying experience?
Pixio is focused on the goal of delivering tremendous value and all the performance and features needed to play without any extra bells and whistles. Witness the PX248 Prime. It takes an IPS panel running at FHD resolution, adds in adaptive sync and 144 Hz with gaming features like aiming points and a frame counter, and offers it for just $170. Budget gaming rig owners might just have something to smile about.
Pixio PX248 Prime Specifications
|Brand & Model||Pixio PX248 Prime|
|Panel Type & Backlight||IPS / W-LED, edge array|
|Screen Size & Aspect Ratio||24 inches / 16:9|
|Max Resolution & Refresh||1920×1080 @ 144 Hz|
|FreeSync: 48-144 Hz|
|Native Color Depth & Gamut||8-bit / sRGB|
|Response Time (GTG)||1 ms|
|Brightness (mfr)||400 nits|
|Video Inputs||1x DisplayPort 1.2|
|1x HDMI 2.0|
|1x HDMI 1.4|
|Audio||3.5mm headphone output|
|Power Consumption||15.2w, brightness @ 200 nits|
The PX248 Prime features an IPS panel, that’s not a typo. It wasn’t long ago that a monitor priced this low would be TN. That isn’t necessarily bad but in most users’ opinions, IPS is better. It certainly delivers better viewing angles and, in many cases, more saturated color too. The resolution is FHD but at 92 pixels per inch, the image looks quite sharp. You can see the pixel structure if you sit very close but at two or three feet away, you won’t notice any jaggies.
An edge LED backlight delivers 400 nits, once you make a few tweaks in the OSD. We’ll tell you about that later. The color gamut is sRGB at 8-bits. The max refresh rate is 144 Hz which used to be an exotic specification but is more a starting point today. But it’s enough speed to make motion blur a non-issue and response times very quick. The input lag of any competent 144 Hz monitor is low enough to make it suitable for competition play.
Adaptive sync is also included, FreeSync natively over a 48-144 Hz range and G-Sync compatibility as confirmed by our tests. The PX248 Prime is not certified by Nvidia.
What’s not here? Extended color and HDR. The gamut is sRGB and with a few simple adjustments, the PX248 Prime displays nicely saturated and accurate color with better than average IPS contrast. The absence of HDR is no big deal. Though we’ve reviewed many HDR monitors over the past year, only a few expensive screens truly do the standard justice. And you won’t see any flashy lighting effects here either.
The PX248 Prime is about solid and reliable performance with only the most necessary features built into a good-looking panel. Let’s take a look.
Assembly & Accessories
The PX248 Prime is a lightweight package that only requires bolting on its slender base. You’ll need a screwdriver for that but Pixio includes one in the box. The power supply is a moderately-sized wall-wart and you also get a DisplayPort cable. Kudos to Pixio for using rubbery packing foam that doesn’t crumble.
The PX248 Prime has a super-thin bezel that’s just 6mm wide on the top and sides and 14mm at the bottom. It’s hard to say if there will ever be a truly frameless panel offered for sale, but manufacturers seem to be inching closer with each new model generation. Styling is simple and elegant so Pixio ensures you know about it by placing a tiny logo front and center. A tiny LED indicates red for standby and blue for active signals.
All monitor functions are controlled by a tiny joystick just behind the bezel center. Press it for the full menu or click it to the sides for picture modes, inputs and game features like aiming points, timers and a frame counter. The clicks are a little soft and we sometimes had to move the stick with more authority to register a response. Being a simple monitor though, the PX248 Prime won’t require any fiddling once properly set up.
The panel is quite thin from the side and in back, you can see a little game-oriented styling in the form of molded-in lines. A 100mm VESA mount is provided for aftermarket arms and brackets. The stand, though tiny, is solid enough to support the panel’s weight of less than 6.5 pounds. Only a tilt adjustment is available, 5° forward and 15° back.
The input panel is clearly marked with one DisplayPort 1.2, one HDMI 2.0 and one HDMI 1.4. The first two support 144 Hz with FreeSync, DP for G-Sync, and the latter accepts signals up to 120 Hz. The pictured USB port is for service only, none are provided for peripherals. Also included is a 3.5mm jack for headphones. You can hook up powered speakers or use the built-in units that pump out two watts apiece. Sound is thin but clear and plays at polite volumes only.
Press the joystick to open the PX248 Prime’s OSD. It’s divided into six logically arranged sub-menus. It features three user memories into which one can save settings once configuration is complete.
The Display menu has brightness and contrast sliders along with a black equalizer to enhance shadow detail and seven game-specific picture modes. The default and best preset is User but you’ll need to make a few changes to see the best possible image. Sharpness should be left at its default while Ultra Vivid adds a good deal of edge enhancement. It’s a look that may appeal to some users but during fast motion games, it causes ghosting and blocking artifacts.
The Color menu offers three color temp presets plus a User mode. Even if you don’t calibrate, you’ll want to set the User option because it unlocks the PX248 Prime’s full brightness potential. The other presets limit peak output to around 280 nits. User will get you over 400 nits. You also get four gamma presets, but we recommend the Off setting. You’ll see why on page three. It makes a big difference in image quality. You can also tweak color hue and saturation and set a low blue light for reading.
Gaming Setup has a FreeSync toggle, three-level overdrive, dynamic contrast and MPRT which is a backlight strobe for decreasing blur reduction. It operates in place of adaptive sync and reduces brightness by around 20%. In our tests, it didn’t improve motion quality so adaptive sync is the better choice. The Game Assist feature offers six different aiming points in red and green, countdown timers and a frame counter which sits in the upper right corner.
Setup and Calibration
The PX248 Prime requires calibration for a good picture. By default, the image is quite blue with very flat detail and brightness that peaks at 280 nits. Pixio rates the panel for 400 and you can get that by simply selecting the User color temp. Gamma defaults to the 2.2 setting but again, it is quite far off the mark. Choosing Off sets things right for both luminance and color. Further adjustments to the RGB sliders result in very accurate grayscale tracking with good gamma and nicely saturated color in the sRGB realm. There is no extended gamut available. Here are the settings we used.
|Brightness 200 nits||51|
|Brightness 120 nits||25|
|Brightness 100 nits||19|
|Brightness 80 nits||13|
|Brightness 50 nits||3 (min. 39 nits)|
|Color Temp User||Red 51, Green 52, Blue 47|
Gaming & Hands-on
The PX248 Prime is a simple gaming monitor that just works without fanfare. Windows immediately recognized its 144 Hz capability and set itself accordingly. We turned on adaptive sync and had no problems with either AMD FreeSync (Radeon RX 5700 XT) or Nvidia G-Sync (GeForce GTX 1080 Ti). A few test patterns showed everything to be operating correctly with no tearing or artifacts seen. Blur Buster’s ghosting tests proved that Low is the best setting for overdrive. Higher options produce white trails behind moving objects that reduce resolution. The Nvidia pendulum test indicated that Low Framerate Compensation was in play below 48 Hz. We took the frame rate down to 20 fps and didn’t see a single tear.
As a general use monitor, the PX248 Prime should be calibrated for the best possible image. Once done, text and icons are sharp with solid contrast of black fonts against white backgrounds. Photo editing is easily accomplished with fine detail that’s easy to see. Pixel density is good enough for any kind of workday task.
Tomb Raider rendered well with good contrast and black levels in nighttime sequences. Motion processing didn’t call attention to itself with solid resolution and instant response to control inputs. Color was bold and well-saturated though some users might miss the P3 gamut if they’ve become accustomed to it. If you’re shopping at this price point though, that’s unlikely. Frame rates were easy to peg at 144 fps with both our test beds. FHD resolution means high speeds are easy to achieve.
Playing a brightly lit indoor sequence in Call of Duty WWII showed good rendering of texture and dimension. Lighting effects were realistic with no banding apparent. Transitions between light and dark spaces looked natural and film-like. Closeup details like skin or wall coverings had a three-dimensional quality that made the game more immersive. Frame rates were maxed in this game too with perfect control response that never wavered. A reliably fast monitor like the PX248 Prime can ensure that all your gaming skills are brought to bear.